Additionally, the gain it provides is always a consistent 28dB regardless of the connected load, thanks to its dedicated buffer amplifier.įrequency Range: 10 Hz - 120,000 Hz (-0.3 dB)
With a sophisticated class-A design and high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Its output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz and hum. The DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp all without adding noise or colouration. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your passive microphones. Recorders, Classroom & Plastic Instruments.Signal Processors, Converters & Preamps.Max output level (0.5% THD): 8.3 dBV (2.6 V)Ĭonnectivity: 3-pin male/female XLR connectorĭimensions: Diameter: 19 mm (0.75 in.) Length: 95.5 mm (3.76 in.
for loss-free and reliable signal connectionįrequency Range: 10 Hz - 120,000 Hz (-0.3 dB).slim design allows for easy placement in the studio or on stage.high-quality finish ensures a great look for many years.efficient rejection of any electrical interference and noise.SLIM, RUGGED ALL-METAL HOUSING WITH PREMIUM FINISH drives long cable runs and can reduce susceptibility to RF interference, buzz & hum.provides +28dB output independent of load impedance or cable length.transformerless design for pristine sound quality.state of the art electronics and high-grade FETs provide supremely low noise.provides significantly improved level to your mic preamp for proper gain staging.
gain stays consistent regardless of connected load.the perfect way to boost the signal of a passive microphone.designed for neutral, balanced sound quality.+28dB OF CLEAN, CONSISTENT GAIN, INDEPENDENT OF LOAD If necessary, a cable can be used between the microphone and the DM1 - but the shorter the cable, the better the overall performance will be. Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards.įor optimum results, we recommend you plug the DM1 directly into your microphone’s output. Whether you’re a podcaster, recording engineer, or running live sound, the DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound. Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYNAMITE: explosive level for all your passive mics.
0 kommentar(er)
